Panasonic KX-HDV130 - Page 229

Default Value Empty string
CON_REQ_PASS
Value Format STRING
Description Specifies the password used to authenticate an ACS making a
Connection Request to the CPE.
Note
• When the "CON_REQ_USER_ID" parameter is specified, an
empty string for this parameter is not allowed.
Value Range Max. 256 characters
Default Value Empty string
ANNEX_G_STUN_ENABLE
Value Format BOOLEAN
Description Specifies whether or not the CPE can use STUN. This applies only to
the use of STUN in association with the ACS to allow UDP
Connection Requests.
Value Range
• Y: Enable
• N: Disable
Default Value
N
ANNEX_G_STUN_SERV_ADDR
Value Format STRING
Description Specifies the host name or IP address of the STUN server for the
CPE to send Binding Requests.
Note
• This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
• If the value for this setting is an empty string and
"ANNEX_G_STUN_ENABLE" is set to "Y", the CPE must use the
address of the ACS extracted from the host portion of the ACS
URL.
Value Range Max. 256 characters
Default Value Empty string
ANNEX_G_STUN_SERV_PORT
Value Format INTEGER
5.3.9 TR-069 Settings
Document Version: 2017-07 Administrator Guide 229