Panasonic KX-HDV130 - Page 285

SIP_403_REG_SUB_RTX_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether or not to send a request when a 403 Forbidden
reply is received from the server in response to a REGISTER or
SUBSCRIBE.
Value Range
• Y: Send
• N: Do not send
Default Value
N
SIP_FORK_MODE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to use SIP Fork.
Value Range
• Y: Use SIP Fork
• N: Not use SIP Fork
Default Value
Y
AKA_AUTHENTICATION_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to use AKA authentication.
Value Range
• Y: Use AKA authentication
• N: Not use AKA authentication
Default Value
N
RFC2543_HOLD_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format BOOLEAN
Description Specifies whether to enable the RFC 2543 Call Hold feature on this
line.
Value Range
• Y: Enable RFC 2543 Call Hold
• N: Disable RFC 2543 Call Hold
Note
• If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
• If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Default Value
Y
5.3.22 SIP Settings
Document Version: 2017-07 Administrator Guide 285