Panasonic KX-HDV130 - Page 334

Description Specifies the Soft Key C (Right) during IDLE state.
Value Range
• 1: Phonebook
• 2: Menu
• 3: Outgoing Call Log
• 4: Incoming Call Log
• 5: Redial
• 6: Page (Used when performing Multicast Paging)
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Page: MPAGE_FUNCKEY_ENABLE
Default Value 3
Web User Interface Reference Soft Key C (Right)
ADMIN_ABILITY_ENABLE
Value Format BOOLEAN
Description Specifies admin rights.
Note
If you attempt to configure System Settings without enabling
admin rights, an error will occur and configuration will not be
possible.
Value Range
• Y: Admin
• N: Non Admin
Default Value
Y
Web User Interface Reference Enable Admin Ability
EMERGENCY_CALLx
Parameter Name Example EMERGENCY_CALL1, EMERGENCY_CALL2, …, EMERGENCY_CALL5
Value Format STRING
Description Specifies the emergency number. (Up to 5 emergency numbers)
Value Range Max. 32 characters (except &, ", ', :, ;, <, >)
Default Value Empty string
Web User Interface Reference 1–5
CALL_REJECTIONx
Parameter Name Example CALL_REJECTION1, CALL_REJECTION2, …, CALL_REJECTION30
Value Format STRING
Description Specifies the rejected number per line. (Up to 30 rejected numbers)
5.3.34 Call Control Settings
334 Administrator Guide Document Version: 2017-07