Panasonic KX-HDV130 - Page 343

Description Specifies which types of devices can be used to respond using "Auto
Answer".
Value Range 0-1
– 0: Speaker Phone
– 1: Headset
Default Value 0
AUTO_ANS_DELAY
Value Format INTEGER
Description Specifies the delay time before "Auto Answer" answers a call.
Value Range 0-20 (sec)
Default Value 6
AUTO_ANS_TYPE (For KX-HDV430)
Value Format INTEGER
Description Specifies which type of calls can be answered by "Auto Answer".
Value Range 0-1
– 0: Voice Call
– 1: Voice and Video
Default Value 0
RETRIVE_TRANS_HOLD_OPER_CHANGE
Value Format BOOLEAN
Description Specifies the action for retrieving transfer-hold calls by pressing a
Line key.
Note
• The action for retrieving conference call on hold by pressing a
Line key in the conference call sequence also follows this
setting.
Value Range
• Y: Disconnect the current call
• N: Follow the "AUTO_CALL_HOLD" setting
Default Value
N
REMOVE_PREFIX_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable omitting "+" included in overseas
telephone numbers when making or receiving a call.
Value Range
• Y: Enable
• N: Disable
5.3.34 Call Control Settings
Document Version: 2017-07 Administrator Guide 343