Panasonic KX-HDV130 - Page 368

Button Description Lamp Indication
ACD
*1
Used to log in or log out of a group
when ACD (Automatic Call
Distribution) is enabled.
Note
• It is necessary to set the ACD
feature to enable (→ see
[Enable ACD] in 4.3.10 ACD
Settings [Line 1]–[Line n] in
the Web user interface or
"ACD_ENABLE_n" in 5.3.14 Call
Center Settings in the
configuration file).
Off: Logged in
Red on: Logged out
Wrap Up
*1
The Wrap Up button alternates the
setting of Wrap Up mode, Not Ready
mode or Ready mode for incoming
calls. In Wrap Up mode/Not Ready
mode for incoming calls, incoming
calls will not be received through the
ACD (Automatic Call Distribution)
group.
Note
• It is necessary to set the ACD
feature to enable (→ see
[Enable ACD] in 4.3.10 ACD
Settings [Line 1]–[Line n] in
the Web user interface or
"ACD_ENABLE_n" in 5.3.14 Call
Center Settings in the
configuration file).
Off: Ready mode for incoming calls
Red on: Unavailable
Flashing red slowly: Wrap Up
Line Status Used to confirm the status of each
line. This allows the function key to
work as a Line key such as seizing a
line in order to make or receive a call.
-
Call Forward Used to forward incoming calls to the
assigned extension in the key.
-
Phonebook Used to open the phonebook. -
Call History Used to open the incoming/outgoing
call log.
-
6.3 Flexible Keys (For KX-HDV230/KX-HDV330/KX-HDV430)
368 Administrator Guide Document Version: 2017-07