Panasonic KX-NS500 - Page 35

FWD Destination
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
2001
600
......
"600" is an example of a
Floating Extension No.
for the External Pager
Intercept Destination
<Intercept Destination of Virtual PS>
...
...
...
2001 1001 1001 1001 1001
Day Lunch Break Night
...... ... ... ...
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Programming Example
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
Intercept Destination Availability
Wired Extension (PT/SLT/SIP Extension/ISDN Extension)
ü
PS
ü
Incoming Call Distribution Group
ü
PS Ring Group
ü
UM Group
ü
VM Group (DTMF/DPT)
ü
External Pager (TAFAS)
ü
DISA
ü
Analogue/ISDN Remote Maintenance
ü
Idle Line Access no. + Phone no.
ü
Trunk Group Access no. + Trunk Group no. + Phone no.
ü
Other PBX Extension (TIE with no PBX Code)
ü
Other PBX Extension (TIE with PBX Code)
ü
Intercept for calls to an outside destination
When
an intercom, trunk, or DISA call is received by an extension and forwarded to an outside destination by
FWD—All Calls or FWD—Busy, the Intercept Routing feature can be used, if the outside destination is busy
or does not answer. For example, when a call is forwarded to a cellular phone by FWD—All Calls, and the
cellular phone is busy, the call will be routed to Voice Mail in the PBX.
Feature Guide 35
2.1.1 Incoming Trunk Call Features