Panasonic KX-NS500 - Page 34

When the original destination is: The Available Intercept Destination is:
• ICD Group
The ICD Group Overflow destination assigned to the
group. (® 2.2.2.7 Overflow Feature)
® 11.5.1 PBX Configuration—[3-5-1]
Group—Incoming Call Distribution Group
—Group
Settings—Overflow No Answer—
Time out &
Manual Queue Redirection
—Destination-Day,
Lunch, Break, Night
• UM Group
The destination assigned to the first extension of the
UM group.
• VM Group (DTMF/DPT)
The destination assigned to the first extension of the
VM group.
• DISA
*1
If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
• Disable: Busy tone is sent to the caller. When
using
an analogue trunk, a ringback tone is sent.
• Operator: The call will be redirected to the
operator.
• AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
® 13.3.1 PBX Configuration—[5-3-1] Optional
Device—Voice Message—DISA System—Option
1—
DISA Intercept—Intercept
when all DISA ports
are busy
• PS Ring Group
*2
• External Pager (TAFAS)
*2
• Analogue/ISDN Remote Maintenance
• Other
PBX Extension (TIE with no PBX Code)
Not assignable (Intercept Routing is not available.)
*1
Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access
(DISA) ports are busy. Once the call
reaches the destination extension by using the DISA feature, the Intercept Routing feature of the extension is used.
*2
By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing destinations
to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
34 Feature Guide
2.1.1 Incoming Trunk Call Features