Panasonic KX-NS500 - Page 108

CS (RJ45)
Signal Name
D1A
D2A
D1C
D2C
D2B
D1B
Pin No.
D2D
D1D
1
2
3
4
5
6
7
8
Master
DHLC4 card (RJ45)
Signal Name
D1A
D2A
TB
RB
D2B
D1B
Port No.
RA
TA
Pin No.
1
2
3
4
5
6
7
8
1
D1C
D2C
TD
RD
D2D
D1D
RC
TC
1
2
3
4
5
6
7
8
Note
• For the DHLC4 card, the 4 ports on the PBX side must be in consecutive order.
• The no. 4 and 5 pins (Master) of the CS must be connected to a pair of pins on the DHLC/DLC card.
• When connecting
multiple KX-TDA0158 CSs to a DHLC/DLC card, make sure that the no. 4 and 5 pins
(Master) of adjacent CSs are at least 1 pair of pins away on the card.
• CS connections must be made within the same DHLC/DLC card.
• When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed.
Check the connection of CS and the PBX using the Web Maintenance Console. For information about
how to view CS information using the Web Maintenance Console, refer to "4.1.2 Status—Equipment
Status—CS Information" in the PC Programming Manual.
• KX-TDA0158 CS cannot be connected to DLC2 (installed by default).
108 Installation Manual
4.2.7 Types of Connectors