3.1 Information about the Activation Keys
Activation keys
are required to use IP trunks and IP telephones on a private IP network with the PBX. Also, to
upgrade the software to use enhanced features, the corresponding activation keys for that feature are required.
Some activation keys are provided by default, some are provided free for a limited period, and others are
provided separately as activation key files.
3.1.1 Type and Maximum Number of Activation Keys
The PBX supports the following type and number of activation keys.
When the number of preinstalled activation keys is not enough for the desired configuration or when you wish
to use enhanced features, additional activation keys in the form of activation key files can be installed using
Web Maintenance Console.
Note
• Store the
downloaded activation key files in your PC or a memory device. They can then be reinstalled
in an emergency situation.
• For information about how to obtain the additional activation keys, refer to "3.1.2 Activation Key Code
and Key Management System".
• For information about how to install the activation key files using Web Maintenance Console, refer to
"5.4.4 Installing Additional Activation Keys".
IP Trunks
Model No. Activation Key Type Description Maximum IP Trunks
KX-NSM102 2 IP Trunk Allows the use of 2 IP trunks (H.
323/SIP).
64 IP trunks
(H.323/SIP)
*1*2
KX-NSM104 4 IP Trunk Allows the use of 4 IP trunks (H.
323/SIP).
KX-NSM108 8 IP Trunk Allows the use of 8 IP trunks (H.
323/SIP).
KX-NSM116 16 IP Trunk Allows the use of 16 IP trunks (H.
323/SIP).
*1
You need to set the number of installed activation keys to be used for H.323 trunks through system programming. By default, all
installed activation keys will be used for SIP trunks.
*2
The maximum number of IP trunks for H.323 is 32.
60 Installation Manual
3.1.1 Type and Maximum Number of Activation Keys
To Next Page
Loading...
