Panasonic KX-NS500 - PRI30;E1 Card (KX-NS5290 CE)

4.5.2 PRI30/E1 Card (KX-NS5290CE)
Function
A combination card including:
• 1 ISDN Primary Rate Interface port (30B channels).
EURO-ISDN/ETSI compliant.
• 1 E1 port (30B channels).
ITU-T standard compliant.
To NT1/ Extension
LED
RJ45
Accessories and User-supplied Items
Accessories (included): Spacer ´ 3, slot cover ´ 1
User-supplied (not included): RJ45 connector, Twisted pair cable
CAUTION
• When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
• PRI ports are SELV ports and should only be connected to SELV services.
Notice
• The cable to connect to the ISDN Primary Rate Interface port of the PRI30/E1 card should be CAT 5
(Category 5) or higher.
Note
• You can select PRI30 use or E1 use by Web Maintenance Console.
– For switching from PRI30 use to E1 use:
Delete the PRI30 card first and select the E1 card in the "PBX Configuration
® Configuration ®
Slot" screen of the Web Maintenance Console. To restart the PBX, click Maintenance ® System
Control ® System Reset.
– For switching from E1 use to PRI30 use:
Delete the E1 card first and select the PRI30 card in the "PBX Configuration ® Configuration ®
Slot" screen of the Web Maintenance Console. To restart the PBX, click Maintenance ® System
Control ® System Reset.
• In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "4.13 Starting the
PBX".
142 Installation Manual
4.5.2 PRI30/E1 Card (KX-NS5290CE)