– EMD List Member Name
– Mailbox Messages
5. Select a file from Local PC, USB Flash Drive (Main Unit), or NAS to restore, and the folder selection
menu becomes active. Specify the folder where the backup data is saved, and then click OK.
The selected voice data will be imported.
Note
• When using a NAS, ensure that you have sufficient network bandwidth.
6. The import results will be saved in a file called "UM_data_restore_result.txt
".
Notice
• It is possible that passwords are set on KX-TVM and Unified Messaging mailboxes. If the passwords
for KX-TVM
mailboxes
are different from the Unified Messaging mailbox passwords, and data is being
restored (imported) individually, you will be prompted for the password of the Unified Messaging
mailbox. If password authentication fails 3 times, the voice data for that mailbox will not be imported.
• If you are not prompted for mailbox passwords during the restore, the password set for the mailbox in
the Unified Messaging system will be used. If no passwords are set for Unified Messaging mailboxes
(excluding the manager mailboxes), the default password specified in the Unified Messaging system
will be applied. If the default password setting is disabled, the password "1111" will be applied. The
default mailbox password will not be applied to the manager mailboxes.
Installation Manual 193
5.3 Starting Web Maintenance Console
To Next Page
Loading...
