Panasonic KX-NS500 - Page 215

KX-NT265 (Software version 2.00 or later only)
PBX IP
Address
To enter the IP address of the PBX
Press PROGRAM
while "Searching" is displayed.
To start programming
Supply power to the IP-PT.
PROG.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
To the VLAN settings
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
To set VLAN parameters
OR
Press STORE.
Installation Manual 215
5.7.1 Assigning IP Addressing Information