Panasonic KX-NS500 - Page 242

KX-NT265 (Software version 2.00 or later only)
To set the DS field value
To start programming
Press PROGRAM while
"Searching" is displayed.
PROG.
Press VOLUME to
select "QoS".
VOL
Press SP-PHONE. Press VOLUME to
select "Diffserv".
VOL
Press SP-PHONE.
To end programming
Press STORE.
HOLD
Press VOLUME to
select "DS (Enable)".
VOL
Press SP-PHONE.
Diffserv
0.0–7.7
Press SP-PHONE.
Press HOLD until the
Menu screen is displayed
The IP-PT will reboot
and can then be
registered to the PBX.
242 Installation Manual
5.7.4 Setting Diffserv Parameters