To Next PageTo Next Page
How to troubleshoot a Panasonic Telephone that doesn't work?
If your Panasonic Telephone does not work properly, confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
Why isn't my Panasonic Telephone working even after following instructions?
If you're following the manual instructions but none of the operations work when using a proprietary Panasonic Telephone, ensure that the Intercom line was seized. Press the INTERCOM or PDN button after going off-hook and follow the instructions.
Why are some features not working on my Panasonic Telephone?
If some features on your Panasonic Telephone aren't working, system management might be restricting them. In that case, you should consult your manager. Also, the feature numbers may have changed, so confirm the revised number and try again.
Why can't I set the IP address, subnet mask address, and PBX IP address to the IP-PT on my Panasonic KX-NS700 PBX?
If you cannot set the IP address, subnet mask address, and PBX IP address to the IP-PT on your Panasonic PBX, it is likely because an unusable value is being set. Set an IP address within the valid range. IP address of the IP-PT/PBX: "1.0.0.0" to "223.255.255.255" Subnet mask address: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255").
Why is external music distorted on my Panasonic PBX?
If external music is distorted on your Panasonic PBX, it is likely due to an excessive input level from the external music source. Decrease the output level of the external music source by using the volume control on the music source.
What does ERR 2006-XXXX DHCP SERVER REJECTION mean on my Panasonic KX-NS700 PBX?
If your Panasonic PBX displays the error ERR 2006-XXXX DHCP SERVER REJECTION and resets, it indicates that the IP address lease time from the DHCP server has expired, or the IP address lease renewal was refused by the DHCP server. Consult your network administrator.
Why does my Panasonic Telephone line disconnect while talking to an outside party?
If your line is disconnecting while talking to someone outside, it may be because the time limit has run out. Consult your dealer to extend the time limit, if necessary.
Why can't I make an outside call with One-touch Dialing or speed dial on my Panasonic Telephone?
If you cannot make an outside call using One-touch Dialing or speed dialing, a line access number might not be stored. A line access number is required for outside calls.
What to do if Panasonic Telephone does not respond when buttons are pressed?
If your telephone is not responding when you press the buttons, it is possible that the telephone is locked. In this case, you should unlock your telephone.
What to do if my Panasonic PBX does not operate properly?
To resolve the issue of your Panasonic PBX not operating properly, restart the PBX. Turn off the power switch, and then turn it back on. Alternatively, turn off the power switch, and then unplug the PBX. After 5 minutes, plug the PBX back in, and turn the power switch back on.
General| Type | Hybrid PBX |
|---|---|
| Maximum Capacity | Up to 288 extensions |
| IP Extensions | Up to 128 |
| Analog Extensions | Up to 128 |
| Digital Extensions | Up to 128 |
| VoIP Channels | Up to 64 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| VoIP Support | Yes |
| Built-in Applications | Voice Mail |
| Networking | IP Networking |
| Dimensions | 430 mm x 88 mm x 367 mm |
Details various methods for making calls, including internal, external, and private network calls.
Explains the functionality of the Unified Messaging system for managing messages.
Covers system manager and message manager functionalities for configuring UM.
Explains how to personalize telephone features and button assignments.
Information for managers on programming PBX features, call charges, and extension controls.
Covers how supervisors can monitor and analyze ICD group call status and performance.
