To Next PageTo Next Page
Why isn't my Panasonic Telephone working even after following instructions?
If you're following the manual instructions but none of the operations work when using a proprietary Panasonic Telephone, ensure that the Intercom line was seized. Press the INTERCOM or PDN button after going off-hook and follow the instructions.
Why PC and fax machine communication failed with Panasonic KX-NS700 PBX?
An indication tone may have interrupted communication.
What if my Panasonic Telephone doesn't have a feature button?
If your telephone model doesn't have a feature button, you can either change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
Why paralleled single line telephones do not ring on my Panasonic system?
If paralleled single line telephones are not ringing, it is possible that 'No ring' is selected in the settings. To fix this, change the setting to ring.
Why can't I have a conversation using my Bluetooth headset with Panasonic Telephone?
If you cannot have a conversation using the Bluetooth headset, make sure that the headset is properly registered to the module. Also, ensure that the headset is properly charged according to the headset's manual. Remove the wired headset from the headset jack, as priority is given to the wired headset when both are connected.
Why does my Panasonic KX-NS700 PBX line disconnect while talking?
If the line is disconnected while talking to an outside party, the time limit may have run out. Consult your dealer to extend the time limit, if necessary.
What to do if Panasonic PBX displays 'Restricted'?
If you hear a reorder tone or see 'Restricted' displayed, the telephone might be locked, so unlock it. Another possibility is that toll restriction is activated, in which case, consult your manager or dealer. Finally, an account code might be required.
What to do if my Panasonic Telephone displays 'Restricted'?
If you are hearing a reorder tone or seeing 'Restricted' displayed on your Panasonic Telephone, it could be due to a few reasons. Your telephone may be locked, so try unlocking it. Toll restriction might also be activated, in which case you should consult your manager or dealer. Finally, an account code may be required.
Why does an SDN button not work on my Panasonic Telephone extension?
If an SDN button on your extension does not work, a PDN button is not assigned on the extension corresponding to your SDN button. To resolve this, create a PDN button on the desired extension.
I forgot the password on my Panasonic Telephone, what to do?
If you forgot the password, ask the manager to assist you.
General| Type | Hybrid PBX |
|---|---|
| Maximum Capacity | Up to 288 extensions |
| IP Extensions | Up to 128 |
| Analog Extensions | Up to 128 |
| Digital Extensions | Up to 128 |
| VoIP Channels | Up to 64 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| VoIP Support | Yes |
| Built-in Applications | Voice Mail |
| Networking | IP Networking |
| Dimensions | 430 mm x 88 mm x 367 mm |
Details various methods for making calls, including internal, external, and private network calls.
Explains the functionality of the Unified Messaging system for managing messages.
Covers system manager and message manager functionalities for configuring UM.
Explains how to personalize telephone features and button assignments.
Information for managers on programming PBX features, call charges, and extension controls.
Covers how supervisors can monitor and analyze ICD group call status and performance.
