A Speaker
B Indicators (4 locations)
Indicate the status of the unit.
Off: The
unit is in standby mode (i.e., not in use).
Blue, flashing: A call is being received.
Blue, lit: The unit is on a call.
Red, lit: The microphones are muted, or an error
has occurred.
C Built-in Microphones (4 locations)
See page 31.
D USB Port (USB)
Used to connect the unit to a computer and use
the included Conferencing Phone Manager
software. Also used to connect the unit to a
computer
to use the microphones and speaker of
the unit for your IP phone software (see
page 45).
E SD Memory Card Slot
Allows you to insert a compatible SD memory
card and record conversations. See
page 29 for
more information about SD memory cards.
F AUDIO IN/OUT Jack
Allows you to connect a compatible Panasonic
Portable Station (PS; see page 43
) or a
computer (see page 46).
G External Wired MIC Jacks (EXT MIC1, EXT
MIC2)
Allow
you to connect an External Wired MIC to the
unit (see page 31). 2 mics can be connected.
H DC Input (DC IN)
Used
to connect the unit to an AC outlet using the
included AC adaptor.
I LAN Port (LAN)
Used to connect the unit to an IP network. May
also
be used to supply power to the unit using PoE
(Power over Ethernet) when the unit is connected
to a PoE-compatible switching hub or power
supply (see page 23).
J Telephone Jack (LINE)
Used to connect the unit to a telephone network
or PBX.
Document Version 2010/02 Operating Instructions 17
Before Use
To Next Page
Loading...
