Panasonic KX-NT700

Formatting SD Memory Cards
If
FORMAT
is displayed, the SD memory card must be
formatted; press
FORMAT
to format the card.
Notice
• When an SD memory card is formatted, all
information on the card is erased.
• Do
not remove the SD memory card, LAN cable,
or disconnect the unit from the AC outlet while
formatting an SD memory card.
• Do not move or bump the unit while formatting
an SD memory card.
Note
• The unit cannot format cards that are not
already
in FAT format. Use a computer to format
non-FAT formatted cards.
Formatting With a Computer
When formatting cards with a computer, select the FAT
(FAT16) format.
Notice
• When an SD memory card is formatted, all
information on the card is erased.
30 Operating Instructions Document Version 2010/02
Preparation