Panasonic KX-NT700

Using the Microphones
Built-in Microphones
For best performance when using the built-in
microphones, speak within about 3 m of the unit.
3 m 3 m
Note
• The sensitivity of the built-in microphones may
vary depending on room characteristics.
External Wired MIC
An optional KX-NT701
External Wired MIC can be
connected to the unit using the EXT MIC1 (A) or EXT
MIC2 (B) jacks. 2 mics can be connected.
A
B
For best performance when using an External Wired
MIC:
– Do
not move an External Wired MIC while on a call.
(Feedback may occur.)
– Place each External Wired MIC at least 1 m away
from the unit.
– Speak within about 2 m of the External Wired MIC.
2 m 2 m
Note
• The sensitivity of an External Wired MIC may
vary depending on room characteristics.
• The built-in microphones continue to function
when an External Wired MIC is connected.
• The indicator of an External Wired MIC
indicates unit status the same as the built-in
indicators (see page 17).
Document Version 2010/02 Operating Instructions 31
Preparation