Connection to an IP Network (Intranet) and/or Panasonic Pure IP-PBX
Allows you to make and receive calls over an IP network.
In this document, this connection method is referred to as the
"IP line", and calls made using the IP line are
referred to as "IP calls". There are 2 modes for making and receiving IP calls. When using IP-PBX mode (see
page 2), the unit can make and receive IP calls as a SIP extension of a Panasonic KX-TDE or KX-NCP series
PBX. When using peer to peer mode, the unit communicates directly with the other party's device.
Connection to an Analogue Telephone Network or PBX
Allows you to make and receive traditional phone calls.
In this document, this connection method is referred to as the "TEL line", and calls made using the TEL line
are referred to as "TEL calls".
Connection to a Compatible Panasonic Portable Station
By connecting the unit to a compatible Panasonic Portable Station (PS) using the included PS Cable, you can
use the microphones and speaker of the unit for calls made or received with the PS.
In this document, this connection method is referred to as the "PS line", and calls made using the PS line are
referred to as "PS calls".
Connection to a Computer
By connecting the unit to a computer using the included PC Cable or the included USB Cable, you can use
the microphones and speaker of the unit for calls made or received with the computer using your preferred IP
phone software.
In this document, this connection method is referred to as the "PC line", and calls made using the PC line are
referred to as "PC calls".
Document Version 2010/02 Operating Instructions 3
Introduction
To Next Page
Loading...
