Operation Mode
By selecting an operation mode, the unit can be
operated
as a SIP extension of the PBX, a peer to peer
IP conferencing phone, or a computer's USB audio
device. The available line selection for each operation
mode is as follows:
Operation Mode Available Line Selection
IP-PBX
IP + TEL
IP + PS
IP + PC
Peer to Peer
IP + TEL
IP + PS
IP + PC
USB Audio –
1. Press [MENU].
2. Select "Operation Mode", then press
.
3. Select the desired setting.
• "IP-PBX": The unit can make and receive IP
calls
as a SIP extension of the PBX. (This is the
default setting.)
• "Peer to Peer": Peer to peer IP calls are
possible. To make a call, the other party’s IP
address is specified.
• "USB Audio": The unit operates as the USB
audio device of a computer (see page 45).
4. Press
.
5. Press [MENU].
Note
• If this setting is changed, the unit must be
restarted before the new setting becomes
effective (see page 47).
• When the operation mode is set to "USB
Audio", IP, TEL, PS or PC calls cannot be
made or received.
28 Operating Instructions Document Version 2010/02
Preparation
To Next Page
Loading...
