Panasonic KX-NT700

Initialisation Features
Erasing Data
The following features allow you to erase system data
and user data stored in the unit.
Erase All Call Log Data
Allows you to erase all entries in the redial list.
Erase All Phonebook Data
Allows you to erase all entries in the phonebook.
Reset System Data
Allows you to reset all system data to the factory
default settings.
• The following data and settings are not erased
when this feature is executed.
– "Date & Time" setting (note that the
"Time Format" setting is reset)
– Phonebook entries
– Redial list
– SD memory card recordings
Reset All Data
Allows you to reset all system data, user data, and
all
settings. The unit is returned to its factory default
state when this feature is executed.
• The following data and settings are not erased
when this feature is executed.
– SD memory card recordings
• The following data and settings are erased
when this feature is executed.
– "Date & Time" setting
– Phonebook entries
– Redial list
Note
• These
features do not erase the contents of the
SD memory card. To erase the SD memory
card, see page 42.
Erasing the Redial List
1. Press [MENU].
2. Select "System Options", then press
SELECT
.
3. Select "Erase
All Call Log Data", then press
SELECT
.
4. Select "Yes", then press
SELECT
.
5. Press [MENU].
Erasing the Phonebook
1. Press [MENU].
2. Select "System Options", then press
SELECT
.
3. Select "Erase All Phonebook Data", then
press
SELECT
.
4. Select "Yes", then press
SELECT
.
5. Press [MENU].
Resetting System Data
1. Press [MENU].
2. Select "System Options", then press
SELECT
.
3. Select "Reset System Data", then press
SELECT
.
4. Select "Yes", then press
SELECT
.
• The unit will restart automatically.
Resetting All Data
Notice
• The unit is returned to its factory default state
when this feature is executed. All user data
(except
for the contents of the SD memory card)
will be erased.
1. Press [MENU].
2. Select "System Options", then press
SELECT
.
3. Select "Reset All Data", then press
SELECT
.
4. Select "Yes", then press
SELECT
.
• The unit will restart automatically.
• If "Select Country" is displayed after the unit
restarts, press [ ] or [ ] repeatedly to select
the country of use, then press
SAVE
.
Document Version 2010/02 Operating Instructions 63
Initialisation Features