Panasonic KX-NT700

2. Press
EDIT
.
3. Edit the name if necessary, then press [ENTER].
4. Press [ ] or [ ] to select the line ("IP" or "TEL")
that
will be used when you call the entry, then press
SELECT
.
5. Edit the phone number or IP address if necessary,
then press [ENTER] or
SAVE
.
6. Press [MENU].
Note
• If
you do not press any buttons for 1 minute, the
unit will return to standby mode.
Erasing Entries
Erasing 1 Entry
1. Search for the desired phonebook entry (see
page 34).
2. Press
ERASE
.
3. Press
YES
.
• To cancel, press
NO
.
4. Press [MENU].
Erasing All Entries
1. Press .
2. Press
ERASE
.
3. Press
YES
.
4. Press [MENU].
Note
• You can also erase entries using the
"Erase
All Phonebook Data" feature (see
page 63).
Document Version 2010/02 Operating Instructions 39
Phonebook