Panasonic KX-NT700

SIP Signalling Port Number
Description Available Settings Default Setting
Determines the port number used for SIP signalling.
• If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
1024–50999
5060
RTP Port Number (Minimum)
Description Available Settings Default Setting
Determines the lowest port number used for RTP.
• Set
this parameter to a value lesser than the setting for
"RTP Port Number (Maximum)".
51000–51998
(even values only)
51000
RTP Port Number (Maximum)
Description Available Settings Default Setting
Determines the highest port number used for RTP.
• Set this parameter to a value greater than the setting
for "RTP Port Number (Minimum)".
51002–52000
(even values only)
52000
QoS Settings
VLAN ID
Description Available Settings Default Setting
Determines the VLAN ID.
• If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
0001–4095
4095
VLAN Priority
Description Available Settings Default Setting
Determines the VLAN priority.
• If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
0–7
0
Document Version 2010/02 Operating Instructions 59
Programming the Unit