Parameters
When programming the unit from the front panel, the current setting is indicated on the display by
"ü".
SIP Ext. No.
Description
Allows you to confirm the unit's SIP extension number. This parameter is only available when the operation
mode is set to "IP-PBX".
To change the SIP extension number, see
page 27.
Show IP Address
Description Available Settings Default Setting
Allows you to confirm the unit’s IP address.
To change the IP address, see page 26
.
—
192.168.0.2
Operation Mode
Description Available Settings Default Setting
The unit can be operated as a SIP extension of the PBX, a
peer to peer IP conferencing telephone, or a computer's
USB audio device.
• If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
IP-PBX
Peer to Peer
USB Audio
IP-PBX
Document Version 2010/02 Operating Instructions 51
Programming the Unit
To Next Page
Loading...
