Panasonic KX-NT700

Function Button Icons
Operation Icon Description
Line Selection
TEL
Used to select the TEL line.
Only displayed when the
"Line Selection" setting is set to "IP +
TEL" (see page 25).
IP
Used to select the IP line.
PS
Used to select the PS line.
Only displayed when the
"Line Selection" setting is set to "IP +
PS" (see page 43).
PC
Used to select the PC line.
Only displayed when the
"Line Selection" setting is set to "IP +
PC" (see page 46).
LINE
Used to change the "Line Selection" setting (see page 32).
Starting and
Ending Calls
ANSWER
Used to answer an incoming call (see page 36).
REJECT
Used to reject an incoming call (see page 36).
Used to make a call (see page 33).
END
Used to end the current call.
CONF
Used to establish a conference call (see page 34 and page 36).
SPEED
Used to slow down the other party’s speech while on a call (see
page 37).
Phonebook
Used to open the phonebook (see page 38).
ADD
Used to add an entry to the phonebook (see page 38).
EDIT
Used to edit a phonebook entry (see page 38).
CHAR
Used to switch between alphabet entry mode and extended entry mode (see
page 40).
Used to move the cursor to the left.
Used to move the cursor to the right.
ERASE
Used to erase an entry in the phonebook (see page 39).
Recording and
Playback
REC
Used to start recording to the SD memory card (see page 41).
PLAY
Used to play the selected recording (see page 41).
STOP
Used to stop recording (see page 41).
Used to rewind the current recording (see page 42).
Used to fast forward the current recording (see page 42).
ERASE
Used to erase a recording (see page 42).
Document Version 2010/02 Operating Instructions 21
Before Use