Panasonic KX-TC1891B - Installing the Battery in the Handset.16; Battery Charge.16

t Settings
Installing the Battery in the Handset
Install the battery and close the handset cover, locking it into place
Battery Charge
Place the handset cn the base unit and charge for about 6 hours before
initial use
■ The IN USE/CHARGE indicator
lights
IN USE/CHARGE Indicator
Battery strength
You can check the battery strength on the display while the handset is on
the base unit, while it is in use (making/answering a call etc ), or after
viewing the Caller List or directory items, programming etc
The battery strength will remain on the display for a few seconds after
using the handset, then the display will return to the standby mode (see
next page)
The battery strength is as shown in the chart below
Display prompt Battery strength
[III]
Fully charged
[ II]
Medium
( 1]
Low
■ ] ' (flashing) Needs to be recharged
16