Panasonic KX-TC1891B - Line Selection.66

t Special Features
Line Selection
The unit will automatically select a free line which is not being used by a
parallel connected telephone when you make a call The unit will select
the called line when you answer a call To change the line selection,
program as follows
Make sure the unit is in the standby mode
1
2
3
4
5
Press [FUNCTION/EXIT/CH]
Press 3 or 3) repeatedly until the arrow
points to “Program"
Press FWD/EDIT® (Yes key)
Press (3 or (3 repeatedly until the arrow
points to “Line selection”
Press FWD/EDIT® (Yes key)
■ The current selection is displayed
Lmel LINE 1 will be selected
Line2 LINE 2 will be selected
Auto A free line will be selected (LINE 1 has
priority) when making a call The called
line is automatically selected when
answering a call (factory preset)
► P r o g ram
▼ A ► =Yes
► L me selection
Incoming call
TA ► = Y e s
Line selection
Auto
TA
► = S a ve
6
7
Press (3 or (3 repeatedly until the
desired line selection is displayed
Press FWD/EDIT ® (Save key)
■ A beep sounds
■ To return Id the standby mode, press
[FUNCTION/EXIT/CH)
Line
selection
Lme2
TA
► = S a ve
Line selection
Lme2
■ You can exit the programming mode any time by pressing [ FUNCTION/EXIT/CH]
■ Any line can be selected manually, regardless of the mode selected in step 6,
by pressing the line button
66