Panasonic KX-TC1891B - One-Touch Dialer.47; Storing a Phone Number in the DIRECT Button.47

One-Touch Dialer
A phone number stored in the (DIRECT) button can be dialed with
a one-touch operation
Storing a Phone Number in the DIRECT
Button
Make sure the unit is in the standby mode
-J Press (FUNCTION/EXIT/CH)
2 Press QF) or ® repeatedly until the arrow
points to “Program”
0 Press FWD/EDIT ® (Yes key)
4 While the arrow points to “Save
DIRECT#”, press FWD/EDIT [ ► ) {Yes key)
5 Enter a phone number, up to 48 digits
• Each time you press
( I N TERCOM/HOLD/CLEAR) , the digit to
the left of the cursor is erased To erase all of
the digits, press and hold
(INTERCOM/HOLD/CLEAR ]
•The last 32 digits number you entered will be
displayed To confirm the remaining number,
press BACK QD or FWD/EDIT ( ► ]
► P r ogram
▼ A ► = Y es
► S a ve DIRECT#
Set flash time
YA ► = Y e s
□
4^ Y=Next
1234567890123456
7890123456789012
4^ Y=Next
6
Press (3 (Next key)
• If you want to edit the entered number, press
B (Edit key) and return to step 5
1234567890123456
7890123456789012
A=Edit ► = S a ve
7
Press FWD/EDIT ® (Save key)
•A beep sounds
•To return to the standby mode, press
(FUNCTION/EXIT/CH)
1234567890123456
7890123456789012
Save DIRECT#
• You can exit the programming m ode any time by pr essing ( F U N CTION/EXIT/CH]
• If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p 64) in step 5
47