Panasonic KX-TC1891B - Selecting the Ringer Volume.23

Selecting the Ringer Volume
You can program the ringer volume to HIGH, LOW or OFF If set to OFF,
the unit will not ring Your phone comes from the factory set to HIGH
Make sure the unit is in the standby mode.
Press (FUNCTION/EXIT/CH'
s®.
FWD/EDIT ( ► ]
2 Press Q or (3 repeatedly until the
arrow points to “Ringer volume”
g Press FWD/EDIT ( ► ] (Yes key)
4 Press ®) (Linel) or 31 (Line2) to
select the desired line
Save directory
► R i n ger volume
▼ A ► = Y e s
Ringer volume
T=Lmel A=Lme2
5 Press 3 or 3 to select the
desired volume
•The selected volume is displayed and
rings
•The handset will return to the standby
mode
•To turn the ringer OFF,
press and hold 3 until 2 beeps
sound
•To turn the ringer ON,
press 3 or 3
•The ringer for the selected line will
sound at the LOW level
HIGH
LOW
Ringer Linel
Low III III High
▼ A
® w
n ®
Ringer
Linel
Low 11 High
TA
OFF Ringer off: Ll
•When you replace the battery, the selected ringer volume setting will return to
the factory set (HIGH) Reprogram if necessary
23
Preparation