Panasonic KX-TC1891B - Setting the Auto Talk Feature.22

t Programmable Functions
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing [TALK] If you want to use this feature, turn
the feature ON by programming Your phone comes from the factory set
to OFF
Make sure the unit is in the standby mode
1
2
3
4
5
6
Press (FUNCTION/EXIT/CH]
Press B Dr repeatedly until the arrow
points to "Program"
Press FWD/EDIT ®) (Yes key)
Press B or f^l repeatedly until the arrow
points to "Talk switching"
Press FWD/EDIT ® (Yes key)
Press (B or to select “On” or “off"
Press FWD/EDIT® (Save key)
■ A beep sounds
■ To return to the standby mode, press
(FUNCTION/EXIT/CH]
► P r o g ram
▼ A ► =Yes
► T a l k switching
TAD program
▼ A ► = Y e s
Auto talk
Off
▼ A ► = S a ve
Auto talk
On
■ You can exit the programming made any time by pressing [FUNCTION/EXIT/CH]
■ To answer a call when the Aula Talk feature is OFF, lift the handset off the base
unit and press [TALK]
22