Panasonic KX-TC1891B - Selecting the Callers Recording Time.30

t Preparing the Answering System
Selecting the Caller’s Recording Time
You can select "1 minute", “3 minutes" or “Greeting only" far the caller’s
recording time Your phone comes from Ihe factory set to "3 minutes"
1
2
3
4
5
Press fFUNCTION/EXIT/CH]
Press (3 or (3 repeatedly until the arrow
points to "Program"
Press FWD/EDIT ® (Yes key)
Press (3 or (3 repeatedly until the arrow
points Id "TAD program"
Press FWD/EDIT (F) (Yes key)
■ The base unit display shows the answering
syslem function menu
► Save
direc tory
Ringer volume
▼ A
► = Y e s
► Program
▼ A
► = Y e s
► Save
DIRECT#
Set
flash time
TA
► =Yes
Talk switching
► T AD program
▼ A ► = Y e s
Answering
system setting
See base unit
6
7
Press ©
To select LINE 1, press (T)
To select LINE 2, press ©
■ The current setting af the selected line is
displayed on the base unit
Base unit display
Recording time
l = Linel 2=Lme2
8 Press (T), © or © to select the recording
time
1 1 minute
2 3 minutes (factory preset)
3 Greeting only
Base unit display
Recording time
Linel 3min
9 Press FWD/EDIT ( ► ] (Save key)
■ A beep sounds
■ To program the other line, start again from step 4
■ To return to the standby mode, press (FUNCTION/EXIT/CH]
If you select "Greeting only", the unit will answer a call with the
greeting message, and then hang up The unit will not record any
incoming messages
30