Panasonic KX-TC1891B - Page 29

• In step 7, you cannot enter numbers greater than 12 Do not use military time
(To set 13 00 hours, enter “0100” and select “PM” by pressing (*})
If a power failure occurs, “0” will flash or the incorrect day/time will
be shown on the main unit display Reprogram the current day/time
To check the day/time
Repeat steps 1 to 6 on page 28
• The current day/time is heard When finished, press [FUNCTION/EXIT/CH]
I *The Caller ID information will re-set the clock after the first ring if the j
adjusted time is incorrect However, the day will not be re-set by the Caller j
j ID information Adjust the correct day by following the steps on page 28 I
| »lf the time has not previously been set, the Caller ID information will not
I adjust the clock
•The Caller ID information will automatically adjust the clock for daylight
saving time
29
Preparation