Panasonic KX-TC1891B - Page 34

t Making Calls
To put a call on hold
Press (INTERCOM/HOLD/CLEAR j .
■ “Hold" is displayed.
■ The called line stalus icon on the handset and
the called line button on the base unit flash.
warn
"hol'd
[ill]
To release the hold
Press the line button on the handset whose status icon is flashing Dr the
line button on the base unit which is flashing.
■ If another phone is connected on the same line (p. SB), you can also release the
hold by lifting its handset.
Backlit LCD display
The lighted handset display will stay on for about a few seconds after
pressing a handset button, lifting the handset off the base unit, hanging
up a call, leaving the programming mode or ending the intercom.
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the
handset off the base unit, and flash when a call is received.
The lights will go out about a few seconds after pressing a button, lifting
the handset, answering a call, hanging up a call, leaving the programming
mode or ending the intercom.
What the line status icons (“an” and “ed”) on
the display mean (Handset)
Off The line is free.
On
You are using the line on the handset, base unit
□ r parallel connected telephone.
Flashing
A call is on hold.
The answering system is operating on a call.
Flashing quickly
A call is being received.
34