Panasonic KX-TC1891B - Page 50

t Using the Directory
1
2
Press (FUNCTI0N/EX1T/CH)
While the arrow points to "Save
directory", press FWD/EDIT [ ► ") (Yes
key)
■ The display shows the number of stored items
in the directory
► S a ve directory
Ringer volume
TA ► = Y e s
Directory^
2 0 it Eos
3 Enter a name, up to 15 characters, with the
dialing buttons, BACK ® or FWD/EDIT
B
■ See the steps for entering names and symbols
(P 51)
■ If a name is not required, press p^ 7 ) (Next
key) and go to step 5
Enter name
□
4k T=Next
Enter name
Tom Jones]
4k T=Next
4
5
Press (3 (Next key)
Enter a phone number, up to 22 digits
■ Each time you press
[ intercom/hold/clear] . a character is
erased from the right To erase all of the digits,
press and hold |INTERCOM/HOLD/CLEAR 1
Enter phone no
03B7654321Q
T=Next
6
7
Press (3 (Next key)
Tom Jones
09 B7 65 43 21
A=Edit ► = S a ve
Press FWD/EDIT B ( s ave key)
■ A beep sounds
■ To conlmue sloring other items, repeal from slep 2
■ To return to the standby mode, press (FUNCTION/EXIT/CH)
■ If a pause is required for dialing, (REDIAL/PAUSEl can be stored in a phone
number counting as one digit (p 64) in step 5
■ You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH)
■ If the display shows “Direotpry f ull" in step 2, the display will return Id
step 1 Press (FUNCTION/EXIT/CH) to exit the list To erase other stored items
from the directory, see page 57
■ If the display shows “save error” in step 7, the item cannot be stored in the
directory Try again from step 1
50