Panasonic KX-TC1891B - Page 62

+ Intercom
During an intercom call*
■ Intercom calls can only be ended with the handsel
■ If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing VOLUME Q
■ If an incoming call is received, the intercom call stops and the unit starts to
ring To answer, press [TALK] , (DIGITAL 5P-PH0NE] or the relevant line
button
Transferring a Call Using the Intercom
The intercom can be used during a call This feature enables you to
transfer a call between the handset and the base unit
From the handset to the
base unit
1 H a ndset
During a call, press
(INTERCOM/HOLD/CLEAR ]
■ The call is put on hold and
"Hold" is displayed
2 H a ndset
During a call, press
(INTERCOM/HOLD/CLEAR ]
again Talk to the paged party
after the beeps
■ “ i ntercom hold” is displayed
■ If the base unit user does not
answer, press the line button
whose status icon is flashing
3 B a se unit
When the paging party's
voice is heard, answer using
the MIC
4 B a se unit
To answer the call, press the
line button which is flashing
■ The transfer is complete
From the base unit to the
handset
I B a se unit
During a call, press
(LOCATOR/INTERCOM/HOLD]
■ The call is put on hold
2 B a se unit
During a call, press
(LQCATOR/INTERCOM/HOLD
again
■ " P a g i n g Press INTERCOM"
is displayed on the handset
■ I f the handset user does not
answer, press the line button
which is flashing
3 H a n d set
Press
(INTERCOM/HOLO/CLEAR) to
answer the page
■ “ intercom hold” is displayed
4 H a ndset
To answer the call, press the
line button whose status icon
is flashing
■ The transfer is complete
62