DECT Portable Station Features 5-51
5.3 PS Programming
Setting the PS Programming Password (Level 1)
You can set the PS Programming password. In this case, you
must enter your password in order to display the following
programs.
– Controlling the directory lock
– Clearing the settings in memory
– Setting the PS programming password
(Default: DISABLE)
Setting the DECT System Lock (Level 2)
You can enable or disable the DECT System Lock. If enabled,
you must enter your password when entering the PS
Programming mode in order to display the following programs.
– Selecting the DECT system
– Cancelling the PS registration
– Setting the DECT system lock
(Default: DISABLE)
DECT-SYS LOCK
= DISABLE
PS PASSWORD
= DISABLE
To Next Page
Loading...
