6-2 DSS Console Features
6.1 Configuration
With a Directed Station Selection (DSS) Console, you can make or transfer calls and
access system features with the touch of a button. The DSS Console must be connected
to the Panasonic Digital Super Hybrid System and paired with a DPT. System
Programming is required to designate the jack numbers of the paired DSS Console and
DPT. With a paired telephone, you can carry out the following operations using the DSS
Console:
• Direct access to an extension (Direct Station Dialling)
• Quick access to an outside party (One-Touch Dialling)
• Quick access to a system feature (One-Touch Access for System Features)
• Easy transfer to an extension (Call Transfer)
The above functions are enabled simply by pressing buttons on the console which are
pre-programmed as function buttons through Station Programming.
There are three DSS Console models.
Conditions
• The DSS Console and the Digital Proprietary Telephone (DPT) should be placed side
by side on your desk.
• A standard telephone cannot be utilised in conjunction with the DSS Console.
• For System Programming, please consult with your dealer.
Programming References
• System Programming — Installation Manual
[007] DSS Console Port and Paired Telephone Assignment
DSS Buttons
KX-T7440
66
KX-T7441
48
KX-T7240
32
PF Buttons None None 16
ANSWER Button None Yes None
RELEASE Button None Yes None
To Next Page
Loading...
