Panasonic KX-TD816E - Ringing Tone Selection for Intercom Calls

2-42 Station Programming
2.2 Station Programming
Ringing Tone Selection for Intercom Calls
Allows you to assign a ringer frequency for intercom call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the INTERCOM button which you wish to change the
ringing tone.
2. Press the same INTERCOM button again.
• The display shows the current status.
3. Enter the tone type number (1 through 8).
• The display shows the selected tone type number and you
hear the selected tone until the STORE button is pressed.
(— x: tone type number)
• If you want to change the tone type, enter another tone type
number in succession.
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Condition
• The default is Ringing Tone Type 2.
Tone Type–x
1
2
4
AUTO DIAL
STORE
3
tone type number
INTERCOM
INTERCOM