Panasonic KX-TD816E - Prime Line (CO Line) Preference - Incoming

Station Programming 2-37
2.2 Station Programming
Prime Line (CO Line) Preference — Incoming (Assignment)
When you go off-hook, you answer a call on the line which is assigned as the prime line.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Dial 2.
• The display shows the current status.
2. Dial 3.
3. Dial the CO line number as follows.
- 01 through 08 : if you are connected to the KX-TD816
- 01 through 24 : if you are connected to the KX-TD1232
• The display shows:
(— CO line number xx is
selected)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Pref.In :CO-xx
1
2
4
AUTO DIAL
STORE
3
CO line number
3
2