Panasonic KX-TD816E - Direct Station Selection (DSS) Button

Station Programming 2-17
2.2 Station Programming
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible (CO or DSS) button as a DSS button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS) button which you wish
to assign as a DSS button.
2. Dial 1.
• The display shows:
3. Dial the extension number.
• The display shows:
(— xxxx: extension number)
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• DSS buttons are provided on the DSS Console with a default setting. You can change
the setting from a paired telephone.
• You cannot enter non-existent extension numbers.
1
2
4
AUTO DIAL
STORE
EXT–
CLR
EXT–xxxx
CLR
3
extension number
1