Panasonic KX-TD816E - Station Programming; Call Waiting Tone Type Assignment

2-6 Station Programming
2.2 Station Programming
Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Dial 5.
• The display shows the current tone type.
2. Dial 1 or 2.
- 1 : for selecting Call Waiting Tone 1
- 2 : for selecting Call Waiting Tone 2
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The tone type patterns are described in the Appendix (Section 9).
• Default is “Tone 1” mode.
2
1
3
5
1
2
AUTO DIAL
STORE
or