Panasonic KX-TD816E - Intercom Alerting Assignment

Station Programming 2-33
2.2 Station Programming
Intercom Alerting Assignment
Allows you to select the alerting mode (tone / voice) when receiving an intercom
(extension) call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Dial 4.
• The display shows the current status.
(— When Ring-Calling (Tone
Call) mode is selected)
(— When Voice-Calling mode
is selected)
2. Dial 1 or 2.
- 1 : for selecting Ring-Calling (Tone Call) mode
- 2 : for selecting Voice-Calling mode
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• Default is “Ring-Calling (Tone Call)” mode.
Tone Call
Voice Call
1
2
3
AUTO DIAL
STORE
2
1
or
4