DECT Portable Station Features 5-61
5.5 Troubleshooting
PROBLEM
REMEDY OR PROBLEM SOURCE
The PS stops working during operation.
Handover does not work.
The display does not show a strong
radio signal “ ” even though you are
near the CS.
The alarm sounds during a conversation
while receiving a weak radio signal
“ .”
• Turn the power switch OFF (❍) and ON (●). Then try
again.
• Re-insert the battery and try again.
• You moved to a busy CS or are out of range.
• You moved while not having a conversation (e.g., while
hearing a busy tone).
• The radio channel is busy or a radio communication
error occurred.
• Normally, the PS user can make a call even with a “ ”
status. In this case, the current linked CS is still con-
nected even though another CS is closer.
• The radio signal is weak. Move closer to the CS.
To Next Page
Loading...
