1-24 DPT Overview
1.1 Configuration
While the telephone is idle and on-hook;
1. Press the RING (S2) button.
• The telephone will ring.
2. Press the VOLUME (UP / DOWN ) Control button.
• The telephone will stop ringing in about 4 seconds.
• When the volume level is 0, the display shows ”RNGOFF.”
– KX-T7220 and KX-T7250
1. Adjust the RINGER Volume Selector lever to the desired
setting (OFF/LOW/HIGH).
To adjust the speaker volume
1. Press the SP-PHONE or MONITOR button.
2. Press the VOLUME (UP / DOWN ) Control button.
• The display shows:
<Example>
(— volume level 12)
• You may also adjust the speaker volume while listening to
the background music (BGM On mode), receiving a voice
call, or receiving a page.
SP: 12