Panasonic KX-TD816E - Page 90

2-46 Station Programming
2.2 Station Programming
For KX-T7431 and KX-T7433 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press .
2. Enter the Station Speed Dial number (0 through 9).
• The STORE indicator light turns off.
• The display shows the current status.
<Example>
(— The outside call, 431-2111,
is now programmed.)
3. Enter the desired number (up to sixteen digits).
• 0 through 9, , #, RECALL or FLASH/RCL, PAUSE,
INTERCOM, ( “[” or “]”: secret) and CONF (–: hyphen)
can be used.
• To store the telephone number of an outside party, the line
access code (9 or 81 through 88) must be the leading digit.
• To erase the entry, press the CLR (S2) button or
TRANSFER button.
– CLR (S2) button: for KX-T7433 users
– TRANSFER button: for KX-T7431 users
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
1
4
AUTO DIAL
STORE
2
Station Speed Dial number
3
desired number
9-431-2111
CLR NEXT