3.1 Overview
140 Installation Manual
3.1 Overview
3.1.1 Overview
System programming of the Hybrid IP-PBX can be performed using PC software. The software for the KX-
TDA15 is shared by both the KX-TDA15 and KX-TDA30, and is referred to as the "KX-TDA30 Maintenance
Console". To programme and administer the Hybrid IP-PBX by PC, you need to install the KX-TDA30
Maintenance Console onto the PC.
This manual describes overview and installation of the KX-TDA30 Maintenance Console only.
KX-TDA30 Maintenance Console
*1
*1
The contents and design of the software are subject to change without notice.
System Menu
Menu Bar