169
Stabiliser, Zoom and Flash
Taking Pictures with Wireless Flashes
Preparation
Attach a flash (optional) to this unit.
1
Set the wireless flash to RC mode and position the flash
• Select the channel and group of the wireless flash.
2
Set the menu
→ [Rec] → [Flash]
[Wireless]
Set [Wireless] to [ON]. [WL] will appear with the flash icon on the
recording screen.
[Wireless Channel] Select the channel you have set for the wireless flash in step
1
.
[Wireless Setup] Proceed to step
3
.
3
Use to select the item and press [MENU/SET]
Firing Mode
Flash output
Flash ratio
• Press the [DISP.] button to perform a test firing.
To Next Page
Loading...
