170
Stabiliser, Zoom and Flash
Taking Pictures with Wireless Flashes
[External
Flash]
*
1
[Firing Mode]
[TTL]: The flash output is automatically adjusted.
[AUTO]
*
2
: Sets the flash output using an external flash.
[MANUAL]: Manually sets the flash ratio of an external flash.
[OFF]: The flash of this unit fires only for a communication
light emission.
[Flash Adjust.]
Adjusts the flash output of the flash of this unit manually when
[Firing Mode] is set to [TTL].
[Manual Flash
Adjust.]
Sets the flash ratio of an external flash when [Firing Mode] is
set to [MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]: The flash output is automatically adjusted.
[AUTO]
*
1
: The wireless flash automatically sets the flash
output.
[MANUAL]: Manually sets the flash ratio of the wireless flash.
[OFF]: The wireless flashes of the set group do not fire.
[Flash Adjust.]
Adjusts the flash output of the wireless flash manually when
[Firing Mode] is set to [TTL].
[Manual Flash
Adjust.]
Sets the flash ratio of the wireless flash when [Firing Mode] is
set to [MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
*
1
Not available when [Wireless FP] is set to [ON].
*
2
This option is not available when the flash (DMW-FL200L: optional) is attached to the camera.
â–
Enabling FP firing for the wireless flashes
During wireless recording, an external flash fires an FP flash (high speed repetition of
flash firing). This firing allows recording with the flash at a fast shutter speed.
→ [Rec] → [Flash] → [Wireless FP]
Settings: [ON] / [OFF]
â–
Setting the communication light emission to be used when wireless flash
recording is performed
→ [Rec] → [Flash] → [Communication Light]
Settings: [HIGH] / [STANDARD] / [LOW]
To Next Page
Loading...
Need help?
General
