105
Recording
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
• In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
– When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P104)
– When using a lens that includes an aperture ring
• In Program AE Mode, you can cancel program shift by pressing function button.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode. For more details on
Manual Exposure Assistance, refer to P102.
1 Set a function button to [One Push AE]. (P52)
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2 (When exposure is not adequate) Press [Fn1].
Recording Mode Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
16
0
4000400040003.53.53.5
00
-
3
-
3
16
0
4000
40003.5
3.5
00
-
3
-
3
989898
16
0
SSSSSS
F
15 250
4.0 5.6 8.0
1256030
6060603.5
0
DMC-G6PDF-VQT4Z78_eng.book 105 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
