66
Basic
Using the Viewfinder
∫ About the eye sensor automatic switching
When [LVF/Monitor Auto] of [Eye Sensor] (P66) in the
[Custom] menu is set to [ON] and your eye or an object is
brought close to the viewfinder, the display automatically
switches to the viewfinder display.
A [LVF/Fn5] button
B Eye sensor
• Eye sensor might not work properly depending on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around the eyepiece. Switch manually in that case.
• The eye sensor is disabled during motion picture playback and slide show.
Enabling/disabling the eye sensor and setting its sensitivity
∫ Switching the Monitor/Viewfinder manually
Press [LVF].
∫ Diopter adjustment
Adjust the diopter to suit your vision so that you can see
the characters displayed in the viewfinder clearly.
Switching the Monitor/Viewfinder
[MENU] > [Custom]>[Eye Sensor]
Item Settings
[Sensitivity] This will set the sensitivity of the eye sensor.
[HIGH]/[LOW]
[LVF/Monitor
Auto]
Enables/disables the eye sensor.
[ON]/[OFF]
[LVF]/[Fn5] button can be used in two ways, as [LVF] or as [Fn5] (function 5). At the
time of purchase, it is initially set to [LVF/Monitor Switch].
•
Refer to P52 for details about the function button.
ロヷョ
DMC-G6PDF-VQT4Z78_eng.book 66 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
